inBio160 POE Bundle 1-Door IP-based Biometric Access Control Panel with PoE Splitter
InBio160 carries out the matching of fingerprints on the panels. In this bundle, the PoE splitter can offer 12V 2A DC for both InBio160 and one 12V DC lock. On the input side, just need connect the splitter to a PoE switch. RS485 fingerprint ZKTeco FR series / Wiegand RFID readers support. Communication TCP/IP and RS485. Capacity 3000 fingerprint templates, 30000 cards, 100000 transactions. Support 2 readers.
InBio160 carries out the matching of fingerprints on the panels. The FR Series of readers transmit fingerprint templates to InBio160 via RS485 for fast and accurate matching with templates stored in a data-base. In this bundle, the PoE splitter can offer 12V 2A DC for both InBio160 and one 12V DC lock. On the input side, just need connect the splitter to a PoE switch.
Features
- Support different types of readers. The FR Series of readers transmit fingerprint templates to inBio via RS485. Wiegand inputs are also provided for traditional RFID readers
- More than Door Control. Access additional control and interface with auxiliary relays
- Communication. Can be installed easily on your network and support both TCP/IP and RS485 communication
- Capacity. Support up to 3000 fingerprint templates, 30,000 cards and store up to 100,000 events and transactions
- Advanced Access Control Built-In. Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxiliary input/output linkages are built into controller firmware
- Lowest Total Cost of Ownership. Controller firmware can be upgraded without any advanced tools
User Capacity
30000
Fingerprint
000, 3000
Event Buffer
100000 transactions
Communication
Ethernet, RS485
Nominal Voltage of InBio160
4269
Standby Current of InBio160
50mA
Operating Humidity
20%~ 80%
Number of Doors Controlled
1 Door
Number of Readers Supported
2
Aux. Input
1
Aux. Output
1
Types of Readers Supported
others upon request, 26-bit Wiegand
Number of Inputs
2 (Exit Device and Door Status)
Number of Outputs
2 (1 Form C relay for lock and 1 Form C relay for Aux output)
Weight
3.35kg
Dimensions (Bundle Only)
305.2*298.4*89mm
Dimensions (Board Only)
183*106mm
Maximum Power
15.4W (IEEE 802.3af); 25.5W (IEEE 802.3at)
Input Voltage EN
36-57V
Output Voltage
12V
Network standards
IEEE802.3i 100 BASE-TX, IEEE802.3x flow control, IEEE802.3af/ IEEE802.3at, IEEE802.3i 10 BASE-T
Working Temperature
0°C ~ 45 °C
Interface protection
± 8KV (contact) requires, Able to withstand 8/20us 24A (12A) energy, Meet the IEC61000-4-2 (ESD) ± 15KV (air)
Input
an input RJ45 interface
Output
an output RJ45 connector and a DC output interface
Data transfer rate
10/100/1000Mbps
The maximum transmission distance
100 meters
Operating Temperature
0 °C- 45°C
